important: Nuts and bolts on your bike should always be tightened to the manufacturer's specifications.

How to Box Up Your Bike for Shipping

Learn how to safely package your bike in a cardboard box.

Today we’ll learn how to package your bike in a box for shipping.

What You’ll Need

For this job you’ll need a bike box. Your local bike shop should have one, but it’s a good idea to call ahead with the size of your bike. They should also have some extra fork and axle protectors. Most decent bike shops won’t charge for these materials.

You will also need: packing material such as cardboard, pipe insulation, bubble wrap etc., string or zip ties to fasten padding materials, 4, 5 and 6mm allen wrenches, a 15mm pedal wrench and a 15mm open end wrench if your bike has nutted axles. If you have a bike repair stand, it will make this job a lot easier, but is not necessary.

Tire Pressure

First you’ll want to deflate your tires. You don’t have to deflate them completely but just enough so they are soft. This prevents any damage that could occur with changes in air pressure associated with air travel.

Pedal Removal

Now remove your pedals. Loosen the right pedal by turning counter-clockwise. The left pedal is a reverse thread, so you’ll have to turn it clockwise to loosen it. See the tutorial titled “How to Replace Your Pedals” for more tips on removing and installing pedals.

Brakes

If you have caliper brakes, disconnect your front brake cable and remove the front wheel. For more tips on wheel removal see the tutorial titled “How to Remove and Install Your Wheels“.

Front Quick Release

If your wheels have quick release axles, remove the quick release skewer, and thread the end back on in order to keep it together. Press the axle protectors into each side of the front axle. Slide the fork protector up into the fork drop-outs.

Saddle Removal

Now loosen your seat post clamp and pull the seat and post up and out of the frame.

Protection

Using the cardboard or bubble wrap, wrap the entire bike frame, crank arms and ends of the rear axle. Use zip-ties, string or tape to hold these in place.

Stem Removal

If you have a threadless headset, loosen and remove the top cap of the stem, and then loosen each individual side bolt. Now you can slide the stem up and off the forks steerer tube. Be careful to hold the fork in place so the headset bearings stay in place. Tighten a zip tie around the steerer tube just above the headset, and then thread the top cap back in place and slightly tighten it just enough to keep it in place.

If you have an older quill type stem, loosen the top bolt about a centimeter and then give it a light tap with a hammer to loosen the quill. Now you can pull the stem up and out of the steerer tube.

Packing the Box

Rest the bike on the ground and tie the bike wheel onto the left side of the frame, making sure the axle is not touching any part of the frame. Also make sure your left crank arm is carefully tucked into the wheel spokes so that it does not touch the wheel rim.

Rotate the forks 180 degrees so they are facing backwards. Carefully tuck the handlebars into the right side of the frame. You may need to twist them to ensure the package maintains as low of a profile as possible. Fasten them in place with string or zip ties. Use cardboard or padding as needed to ensure no part of the bars or stem are touching the frame or wheels.

Now lift the bike and slide it into the box.

Wrap your seat and seat post for protection and fasten them to the rear wheel so they don’t rattle around the box.

Now place your pedals, quick release, and any other spare parts in a bag or small box and slide it down just behind the fork.

If you have extra materials such as sleeping bags or clothing you can stuff these into the remaining spaces for extra protection.

Now you’re ready to close your box and secure it with packing tape on both the top and bottom. Make sure any holes in the box are also sealed.

By Alex Ramon

A bicycle geek since early childhood, spent his twenties as a mechanic in bike shops. His passions include flatland BMX, unicycles, cycle touring, mountain biking and road riding.

Recommended Tools

Discuss this topic in the Bicycle Repairs and Mechanics Forum

Sram Transmission derailleur possibly dead?

suspicious broken part after service--is this legit?

Pros & Cons of presta valve vs schrader valves

70's=80's Free Spirit Blaze MTN

Front Disc screeching/vibration .. help please :-)

2nd hand rad rover repair help needed

Axle keeps slipping on applying force/climbing hills..

Need help with Drivetrain Update

Latest post 3 months ago

Hello everyone, I'm an older lifelong cyclist that recently had my beloved old yeti mountain bike stolen, and to try and fill that void, I picked up a 2015 Specialized Crosstrail (I'm riding more paved and gravel trails these days, my full-on mountain bike days are over!). The bike was in very good physical condition, apparently very lightly used. I was unable to ride before purchase, but it looke...

Velowave Ranger break change question

Latest post 3 months ago

Hello! I tried to change my Velowave ranger e-bike breaks and the lever would not have traction. I researched and learned I needed to bleed the breaks, I tried the top method with the cup with a break bleeding kit. Still had the same issue, I tried to use the syringe at the caliper but the hole was too small for any of the included adapters. Is it just trapped air in the calipers/line that is ca...

Eye to Eye Shock Lengths

Latest post 3 months ago

Will my conversion work? I have an old 2014 Giant Trance 1. It is a small frame. It is just a backup bike. It is still fun to ride and works well when a friend is or family member is visiting and bikeless. I hate sending things to the land fill or not being able to keep them repaired and running. I already replaced the fork a couple of years ago. I already found some parts and converted to a ...

Shimano law suit

Latest post 3 months ago

Remember the Shimano law suit? Fortunately I had the"good model series" Thousands of riders trusted these components without a second thought. Now, the story has taken a serious turn. Shimano has agreed to pay an $11.5 million penalty after US regulators found the company failed to report a major defect in its 11 speed road cranksets on time. According to the CPSC, Shimano had received thou...

How to Box Up Your Bike for Shipping

What You’ll Need

Tire Pressure

Pedal Removal

Brakes

Front Quick Release

Saddle Removal

Protection

Stem Removal

Packing the Box

Related Links

Recommended Tools

Categories

Discuss this topic in the Bicycle Repairs and Mechanics Forum

Sram Transmission derailleur possibly dead?

suspicious broken part after service--is this legit?

Pros & Cons of presta valve vs schrader valves

70's=80's Free Spirit Blaze MTN

Front Disc screeching/vibration .. help please :-)

2nd hand rad rover repair help needed

Axle keeps slipping on applying force/climbing hills..

Need help with Drivetrain Update

Velowave Ranger break change question

Eye to Eye Shock Lengths

Shimano law suit

Question regarding rear hub replacement for possible out of production bike?

Need suntour derailleur replacement

Inner side tube punctures

How to adjust shock preload?