How to Shift Your Gears
Learn how to use your full range of gears: applies to 21, 24, and 27 speed shift systems.
Video updates
- 02:14 - Never use either the large/large or small/small gear combination!
Most bikes these days come with ’21 speeds’. However, this doesn’t mean you have 21 useable gears. Actually, on a 21 speed system it’s closer to 13. A lot of people get confused by all of the gear combinations available. I myself didn’t understand it when I first started using a multi-speed bike, so today we’ll learn how to use your gears most effectively.
It’s very important not to shift under pressure, as this will cause shift problems and damage your drivetrain. If you’re going uphill and you need a lower gear, keep pedaling, but ease off and pedal lightly while you shift.
Most systems have three gears on the front, which are controlled by your left shifter. The rear gear cluster usually has 7 gears, with some systems having 8 or 9. Not to worry, the concepts here are the same.
For most everday riding, you’ll want to keep your chain on the middle ring on the front, or number 2 on your left shifter. This allows you to use the full range of rear gears. Number 1 on your right shifter is the easiest gear for climbing hills, as it puts your chain on the largest rear sprocket. Number 7 on your right shifter is the hardest gear for going really fast, and it puts your chain on the smallest rear sprocket.
I find it helps to think of numbers 1 and 3 on your left shifter as options for extreme circumstances.
If you’re climbing a really tough hill and your left 2 and right 1 combination aren’t easy enough, you can shift your front derailleur to number 1 which drops the chain down to the smallest front chainring. While you’re in the smallest front gear you can shift the rear gears between 1 and 3 for a finer range adjustment, but you should always shift the front back to 2, or the middle chainring before using gears 4-7 on the rear.
If you’re going really fast and need a harder gear, and your left 2 and right 7 combination isn’t fast enough, you can shift your front derailleur to number 3 which pulls the chain up to the largest front chainring. While you’re in the largest front chainring you can shift the rear gears between 5 and 7 for a finer range adjustment, but always shift the front back to 2, or the middle chainring before using gears 1-4 on the rear.
Never use the full range of rear gears when you’re in either the small or large front sprockets (number 1 or 3 on the front shifter). This causes too great an angle in your chain line, which can cause noise and shifting problems.
Related Links
- Jim Langley: How to Shift A Bicycle
- Sheldon Brown: Shift Your Bicycle's Gears
- Bicycle Torque Specifications
Recommended Tools
- Park Tool CG-2 Chain Gang Chain Cleaning System
- Park Tool GearClean Brush GSC-1C 11
- Finish Line Wet Chain Lube (Cross Country)
- Phil Wood Tenacious Oil
- Park Tool SK-3 Starter Mechanic Tool Kit
- Park Tool PK-3 Professional Tool Kit
Categories
Discuss this topic in the Bicycle Repairs and Mechanics Forum
Cassette shifting Problem
Latest post 14 hours agoI just replace the 10 speed cassette on my Mountain bike. I decided to go for a largest cog with more teeth for an easier ride uphill.. I increased from 38T to 42T. I also replaced the chain and chainrings at the same time. When the bike was on the stand it ran through the gears well. I had the following problem when out riding. I had just ridden up a steep hill on the 22T chain ring and the ...
Read moreWhat are the pros and cons of using a 26" tube on a 29" wheel?
Latest post 2 days agoI recently upgraded after 20+ years from a 26" to a 29" wheel. Consequently, I have 8 new 26" tubes in my garage. I ride 90% mountain biking. Curious. Have you ever fitted a 26" tube on a 29"? What was the result? And would you recommend it?...
Read moreVariation in Conti GP5000 sizing?
Latest post 3 days agoI must have fitted 3 or 4 pairs of 25mm Continental GP5000 tires without any trouble whatsoever. On different brands of 622x15c rim, they went on without struggle or complaint. Older GP4000 also went on without trouble. However, the most recent set, bought a month ago, are probably the worst I've ever had in terms of the challenge I had to get them fitted. Has anyone else found such a big differ...
Read moreHow often check or change mechanical disc brakes
Latest post 2 weeks agoI'm curious—how often or after how many miles do people typically check or change their mechanical disc brake pads? I've been bikepacking for a while but never really followed a maintenance schedule. A few weeks ago, I took my bike to a mechanic because I heard some noise. The mechanic did a quick overhaul, and I was sent on my way. However, a few weeks later, while descending steep hills, I s...
Read morePros & Cons of presta valve vs schrader valves
Latest post 2 weeks agoA question I've wanted to ask for a while now. From a personal point of view, what have you found to be the positives and negatives of these two valves? What would your preference be?...
Read moreGrip Shifters
Latest post 2 weeks agoCurrently renovating a child's bike. It has 24 inch wheels and is a suitable size for a 7-10 year old. Anyway it has grip shifters. it is a six speed with three chain rings on the front derailleur. On the rear derailleur the shifter does not appear to move the gear cable at all when shifting from 6 to 5 and 5 to 4. I am actually holding the cable with my finger and thumb against the cable cas...
Read moreLeft a bike outside on the balcony for couple of months. How to get rid of the rust?
Latest post 3 weeks agop6i6rfpm1ip41 (1).jpg (Size: 82.1 KB / Downloads: 540) Is there a way to get rid of that rust or do I need to replace certain components? More pics...
Read more9 speed chain on 8 speed bike
Latest post 3 weeks agoAll of my bikes are 7 or 8 speed and sometime in the past I bought a 9 speed chain for some unremembered reason. is there any reason not to use it on an 8 speed bike?...
Read moreRusty chain inspite of cleaning,lubing
Latest post 3 weeks agoHello, I was going to ask this question in @Flowrider’s post, but since this is a slightly different issue, I decided to start a new post. https://forums.bikeride.com/thread-9267.html I’m nowhere near the ocean, so salt-related rusting isn’t a concern. I’m currently in the ninth month of a long bikepacking trip, and sometimes I stay in one place for a week or longer. During this week or ...
Read moreColnago restoration
Latest post 1 month agoHi everyone. A bit repetitive from my intro in GF, but this is the correct section for this post. I’m new to vintage bikes, but I’ve been eyeing a vintage Colnago to restore for a long time. Finally found one and the timing was right to pull the trigger. I’m still trying to identify the exact year, but from my research it’s 1991-1993 Colnago Super PiU. Mostly original, I think, apart from ...
Read moreColumbia 3 wheel differential
Latest post 2 months agoHello everyone and thank you so much for having me! I have an older Columbia 3 wheeler adult tricycle and she has a differential, somewhat like a car. I wanted to open up the differential for cleaning and oiling but cannot find any info on her, as to how much oil to add, and where the oil fill point is. Can anyone help me in this endeavor? I'd really love to get her going but don't want to ris...
Read moreFront derailer not moving
Latest post 2 months agoHi, I been upgrading my old bike with new brake and shift cables. I got my brakes working and now trying to get my shift cables working. I was able to install new shift cable, I made sure to hold the cable tight and tighten the Bolt to keep in place. But it doesn't move the derailer at all when shifting. I have a feeling it's a simple fix that I'm missing something. I thought it might be the new ...
Read moreWhat are the best cost effective ways to prevent chain rust?
Latest post 2 months agoI live 5 km from the ocean (not sure if that's relevant), and I pretty much only mountain bike. After every ride, I hose down and clean my bike. I wipe them down with a cloth. After a few days, the ones not ridden have what looks like surface rust appear on the chain. Do you have any cost-effective remedies to solve this issue?...
Read moreHow to deal with rusty chain
Latest post 2 months agoThe best thing is not to let your chain get rusty in the first place. Chains for most 6,7,8 speed bikes can be had for $15 to $20 all day long. For me my first choice is to just replace it and the reason is simple. If finished it does not meet the level of 95%+ perfect it will get replaced. If the chain you are trying to save does not have a quik link then that is an extra cost to figure...
Read moreRear v-brake repair
Latest post 3 months agoHi everyone, I'm new here and I've been trying to avoid taking my bike to a mechanic and save some money. I succesfully fixed my front but struggle with the rear, I got new brakes for the rear. I notice i think it might be the housing causing the noodle to be off centered and making the left brake pad to close to the rim. Any help would be greatly appreciated, thanks!! My next project is to attemp...
Read more
